Disable Mld_Snooping - D-Link DGS-3200 SERIES Cli Manual

Restrictions
You must have administrator privileges.
Example
To enable MLD snooping on the switch:
D G S - 3 2 0 0 - 1 0 : 4 # e n a b l e m l d _ s n o o p i n g
C o m m a n d : e n a b l e m l d _ s n o o p i n g
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

33-6 disable mld_snooping

Purpose
Used to disable MLD snooping on the switch.
Format
disable mld_snooping
Description
The disable mld_snooping command disables MLD snooping on the switch. MLD snooping can be
disabled only if IPv6 multicast routing is not being used. Disabling MLD snooping allows all MLD and IPv6
multicast traffic to flood within a given IPv6 interface.
Parameters
None.
Restrictions
You must have administrator privileges.
Example
To disable MLD snooping on the switch:
D G S - 3 2 0 0 - 1 0 : 4 # d i s a b l e m l d _ s n o o p i n g
C o m m a n d : d i s a b l e m l d _ s n o o p i n g
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
251