D-Link DGS-3200 SERIES Cli Manual page 404

Format
config ipv6 nd ra ipif <ipif_name 12>
reachable_time <value 0-3600000> | retrans_time < value 0-4294967295> | hop_limit <value 0-255> |
managed_flag [enable|disable] | other_config_flag [enable | disable] | min_rtr_adv_interval < value
3-1350> | max_rtr_adv_interval < value 4-1800> }(1)
Description
To configure router advertisement related arguments.
Parameters
Parameters
ipif_name
state
life_time
reachable_time
retrans_time
hop_limit
managed_flag
other_config_flag
min_rtr_adv_interval
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
The name of the interface.
router advertisement state.
Indicates the lifetime of the router as the default router
in second.
Indicates the amount of time that a node can consider
a neighboring node reachable after receiving a
reachability confirmation in millisecond.
Indicates the amount of time between
retransmissions of router advertisement message in
millisecond, and the router advertisement packet will
take it to host.
Indicate the default value of hop limit field in the IPv6
header for packets sent by hosts that receive this RA
message.
When set to enable, it indicates that hosts receiving
this RA must use a stateful address configuration
protocol to obtain address in the addition to the
addresses derived from the stateless address
configuration.
When set to enable, it indicates that hosts receiving
this RA must use a stateful address configuration
protocol to obtain on-address configuration
information,.
The minimum time allowed between sending
unsolicited multicast Router Advertisements from
the interface, in seconds. MUST be no less than 3
{ state [enable|disable] | life_time <value 0-9000> |
Description
404