Create Stp Instance_Id - D-Link DGS-3200 SERIES Cli Manual

Format
show stp mst_config_id
Description
Show the three elements of the MST configuration Identification, including Configuration Name, Revision
Level, and the MST configuration Table. The default Configuration name is the MAC address of the bridge.
Parameters
Parameters
mst_config_id
Restrictions
None.
Examples
Display the STP MST Config ID:
D G S - 3 2 0 0 - 1 0 : 4 # s h o w s t p m s t _ c o n f i g _ i d
C o m m a n d : s h o w s t p m s t _ c o n f i g _ i d
C u r r e n t M S T C o n f i g u r a t i o n I d e n t i f i c a t i o n
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C o n f i g u r a t i o n N a m e : 0 0 - 2 2 - 2 2 - 2 2 - 2 2 - 0 0
M S T I I D V i d l i s t
- - - - - - - - - - - - - - - - - -
C I S T 1 - 4 0 9 4
D G S - 3 2 0 0 - 1 0 : 4 #

16-5 create stp instance_id

Purpose
To create an MST Instance without mapping the corresponding VLANs yet.
Format
create stp instance_id <value 1-15>
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
If two bridges have the same three elements in mst_config_id , that
means they are in the same MST region.
145
R e v i s i o n L e v e l : 0