Config Multicast Vlan_Filtering_Mode - D-Link DGS-3200 SERIES Cli Manual

Parameters
aging_time
Restrictions
You must have administrator privileges.
Examples
To configure MAC address aging time:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g f d b a g i n g _ t i m e 3 0 0
C o m m a n d : c o n f i g f d b a g i n g _ t i m e 3 0 0
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

17-5 config multicast vlan_filtering_mode

Purpose
Used to configure the the multicast packet filtering mode for VLANs.
Format
config multicast vlan_filtering_mode [vlanid <vidlist>|vlan <vlan_name 32> |all]
[forward_unregistered_groups|filter_unregistered_groups]
Description
The config multicast_fdb command configures the multicast packet filtering mode for VLANs.
Parameters
Parameters
vidlist
vlan_name 32|all
forward_unregistered_groups
filter_unregistered_groups
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Specifies the time, in seconds, that a dynamically learned MAC
address will remain in the switch's MAC address forwarding table,
without being accessed, before being dropped from the database.
The range of the value is 10 to 875.
Description
Specifies VLAN ID list to set.
Specifies VLAN or all VLANs to set.
The filtering mode can be "forward_unregistered_groups", or
"filter_unregistered_groups".
159