Config Arp_Aging Time - D-Link DGS-3200 SERIES Cli Manual

MAC address of the entry.
Parameters
Parameters
ipaddr
macaddr
Restrictions
You must have administrator privileges.
Examples
To configure a static ARP entry for the IP address 10.48.74.121 and MAC address 00:50:BA:00:07:36:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g a r p e n t r y 1 0 . 4 8 . 7 4 . 1 2 1 0 0 - 5 0 - B A - 0 0 - 0 7 - 3 6
C o m m a n d : c o n f i g a r p e n t r y 1 0 . 4 8 . 7 4 . 1 2 1 0 0 - 5 0 - B A - 0 0 - 0 7 - 3 6
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #

30-4 config arp_aging time

Purpose
Used to configure the age-out timer for ARP table entries on the switch.
Format
config arp_aging time <value 0-65535>
Description
The config arp_aging time command sets the maximum amount of time, in minutes, that a ARP entry
can remain in the switch's ARP table, without being accessed, before it is dropped from the table..
Parameters
Parameters
value
Restrictions
You must have administrator privileges.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The IP address of the end node or station.
The MAC address corresponding to the IP address above.
Description
The ARP age-out time, in minutes. The default is 20. The range is 0 to
65535.
226