Network Management Command List; Enable Snmp - D-Link DGS-3200 SERIES Cli Manual

7 Network Management Command List

enable snmp

disable snmp
create trusted_host [<ipaddr> | network <network_address>]
delete trusted_host [ ipaddr <ipaddr> | network <network_address>| all]
show trusted_host {<ipaddr>}
config snmp system_name {<sw_name>}
config snmp system_location {<sw_location>}
config snmp system_contact {<sw_contact>}
enable rmon
disable rmon
enable snmp traps
disable snmp traps
enable snmp authenticate_traps
disable snmp authenticate_traps
7-1 enable snmp
Purpose
Use to enable and disable the SNMP interface access function.
Format
enable snmp
Description
Use to enable and disable the SNMP function. When SNMP function is disabled, the network manager will
not be able the access SNMP MIB objects. The device will not send traps or notification to network
manager either.
Parameters
None.
Restrictions
You must have administrator privileges.
Example
To enable SNMP:
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
82