�
MANUAL TRANSAXLE
8.
REMOVE FRONT BEARING INNER RACE
Using SST and a press, remove the front bearing inner race.
SST
NOTICE:
When replacing the front bearing inner race, replace the
output shaft front bearing along with it.
HINT:
Support the output shaft by hand so that it will not be dropped
off.
DISASSEMBLE REVERSE GEAR ASSEMBLY
9.
Remove the reverse gear from the No. 1 clutch hub.
{a)
Remove the 3 No. 1 shifting keys and No. 1 shifting key
(b)
springs from the No. 1 clutch hub.
000813
OUTPUT
SHAFT
09950-00020
MX-37