SF-12
N
N
N
�
SFI
FUEL PUMP
DISASSEM B LY
Using a small screwdriver, remove the No. 2 fuel suction
REMOVE NO. 2 FUEL SUCTION SUPPORT
1 .
(a)
support.
Remove the rubber cushion.
(b)
REMOVE NO. 1 FUEL SUCTION SUPPORT
2.
Disconnect the fuel sender gauge connector and earth
(a)
plate.
Using a small screwdriver, remove the No. 1 fuel suction
(b)
support.
NOTICE:
Do not damage the fuel suction support and fuel suction
plate.
Disconnect the fuel pump harness from the No. 1 fuel suc-
(c)
tion support and fuel pump.
3.
REMOVE VAPOR PRESSURE SENSOR
Pull off the joint clip and remove the vapor pressure sensor from
No. 1 fuel suction support.
4.
REMOVE FUEL PRESSURE REGULATOR
Pull out the fuel pressure regulator and Q--- r ing from the fuel fil
ter.
REMOVE FUEL PUMP
5.
Remove the pump from the fuel filter.