-
LUBRICATION
OIL PUMP
INSTALLATION
INSTALL OIL PUMP
1 .
(a)
Place a new gasket on the cylinder block,
Engage the spline teeth of the oil pump drive rotor with the
(b )
large teeth of the crankshaft, and sllde the oH pump.
Install the oil pump with the
(c)
Torque: 9.0 N·m (92 kgf.cm,
2.
INSTALL CRANKSHAFT TIMING SPROCKET AND
TIMING CHAIN (See pages EM-25)
FILL ENGINE WITH OIL
3.
START ENGINE AND CHECK FOR LEAKS
4.
5.
RECHECK ENGINE OIL LEVEL
LU-13
bolts.
SO
5
• .
in
lbf)