Toyota Celica 2000 Repair Manual page 509

AX..£
-
ATFTEMPEAATURE SENSOR
10. INSTAll OIL STRAINER
Coat a new 0-- r ing with AT
(a)
Install the 0-ring to the oil strainer.
(b)
Install the oil strainer with the 3 bolts.
(c )
Torque: 11 N-m (110 kgf.cm, 8 fl·lbf)
11. INSTAll OIL PAN
Install the oil pan and a new gasket with the 1 9 bolts.
Torque: 7.8 N-m (80 kgf . cm, 69 in.-lbf)
INSTAll DRAIN PLUG
12.
Install a new gasket and drain plug.
Torque: 49 N-m (500 kgf . cm, 36 ft-lbf)
13. CONNECT SOLENOID CONNECTOR
14. Fill ATF AND CHECK ATF LEVEL
(See page Dl-220)
15. INSTALL LH ENGINE UNDER COVER
F.