Front Stabilizer Bar Inspection; Inspect Stabilizer Bar Link Ball Joint For Rotation Condition - Toyota Celica 2000 Repair Manual

SA-52
- -
-
· -
_ }
L__
SUSPENSION AND AXLE
INSPECTION
INSPECT STABILIZER BAR LINK BALL JOINT FOR ROTA·
TION CONDITION
As shown in the illustration, flip the ba!l joint stud back and
(a)
forth 5 times, before installing the nut.
Using a torque wrench, turn the nul continuously at a rate
(b)
of 2 - 4 seconds per 1 turn and take the torque reading
-�
- - - -
on the 5th turn.
lO.J340
Turning torque:
0.05 - 1 ,0 N,m (0.5 - 10 kgf.cm, 0.4 - 8,7 ln,,lbf)
-