AUTOMATIC TRANSAXLE (U240El
, - - --
-
AUTOMATIC TRANSAXLE UNIT
INSTALLATION
1 .
CHECK TORQUE CONVERTER CLUTCH INSTALLA·
TION
Using calipers and a straight edge, measure the distance be
tween the installed surface and the front surface of the trans
axle housing.
Correct distance: More than 1 3 . 3 mm (0.524 in.)
AT�12
2.
TRANSAXLE INSTALLATION
Installation is In the reverse order of removal (See page
AX-31).
HINT:
•
After installation, adjust the shift control cable and park/
neutral position switch (See page 01-157).
Fill ATF and check the fluid level (See page 01-157).
Perform the test drive of the vehicle.
•
Adjust the hood (See page BG-9).
AX-35