Toyota Celica 2000 Repair Manual page 418

MANUAL TRANSAXLE
REMOVE NO. 3 SYNCHRONIZER RING (FOR 6TH
16.
GEAR)
NOTICE:
At the time of reassembly, please refer to the following
items.
Align the No. 3 synchronizer ring slots with the No. 3
shifting keys.
•
Distinguish the No. 3 synchronizer ring (for the 6th
gear} by the teeth on the synchronizer ring.
17. REMOVE NO. 3 GEAR SHIFT FORK AND NO. 3 HUB
SLEEVE
Remove the bolt, No. 3 gear shift fork and No. 3 hub sleeve.
Sealant:
Part No. 08833--00080, THREE BOND 1 344, LOCTITE
242 or equivalent
Torque: 1 6 N-m (160 kgf-cm, 1 2 11-lbf)
INSPECT 5TH GEAR THRUST CLEARANCE
18.
Using a dial indicator, measure the thrust clearance.
Standard clearance:
0.1 0 - 0.62 mm (0.0039 - 0.0244 1n.)
Maximum clearance:
0.62 mm (0.0244 ln.)
19. INSPECT 5TH GEAR RADIAL CLEARANCE
Using a dial indicator, measure the radial clearance.
Standard clearance:
O.D1 5 - 0.056 mm (0.0006 - 0.0022 1n.)
Maximum clearance:
0.056 mm (0.0022 ln.)
If the clearance exceeds the maximum, replace the gear,
needle roller bearing or shaft
-
MANUAL TRANSAXLE ASSEMBLY
MX-1 7