Remove Parking Brake Lever; Remove Wheel Cylinder; Disassemble Wheel Cylinder - Toyota Celica 2000 Repair Manual

BA-30
N
-
BHAKE
BRAKE llEAA DRUM
Using needle nose pliers, disconnect the parking brake
(b)
cable from the parking brake lever, and remove the rear
shoe.
6.

REMOVE PARKING BRAKE LEVER

Remove the C-washer.
(a)
Remove the parking lever from the rear shoe.
(b)
7.

REMOVE WHEEL CYLINDER

Using SST, disconnect the brake line. Use container to
(a)
catch the brake fluid.
SST 09751-3601 1
Torque:15 N-m (155 kgf.cm, 1 1 ft-lbf)
Remove the 2 bolts and the wheel cylinder.
(b)
Torque:10 N-m (100 kgf-cm, 7 11-lbf)
8.

DISASSEMBLE WHEEL CYLINDER

Remove the 2 boots from the wheel cylinder.
(a)
Remove the 2 pistons from the wheel cylinder.
(b)
Remove the spring from the wheel cylinder.
(c)
Remove the 2 piston cups from each piston.
(d)