Toyota Celica 2000 Repair Manual page 914

Hide thumbs Also See for Celica 2000:

Table of Contents

DIAGNOSIS FUNCTION

Error codes over tuner and connected equipment are displayed on the screen of tuner_

Diagnosis start--- u p

For shifting to diagnosis mode, push "CD" switch 3 times with pressing

at the same time while the audio power is OFF and ACC Is ON.

To exit from diagnosis mode, press

is displayed, the mode is transferred to LAN check mode.)

When starting up the diagnosis mode, the mode turns to LAN check mode, the screen displays the

code numbers (physical address) of tuner and connected equipment. Smaller codes are displayed in

order, displayed code numbers are switched by operating TUNE "UP" or "DOWN� switch. In LAN check

mode, by pressing "5" of PRESET switch for more than 2 sees., diagnosis memory of each equipment

can be deleted, when deletion is completed, the mode returns to LAN check mode.

Code No. (physical address) List

Code No. (physical address)

System check

When pressing " 1 " of PRESET switch in LAN check mode, the rnode turns to the system chock

mode, the system performs self diagnosis of connected equipment and displays the re

sults.(SYS" (showing the system is under detection) is displayed.)

Perform the operation shown in the following illustration, then read the result of the inspection.

BODY ElECTRICAL

switch for 2 seconds or turn the ignition key OFF.

AUDIO SYSTEM

Equipment n a me

assembly (Audio head unit)

and ''6" of PRESET switch

COII!l lG -t lKlOE

Troubleshooting