Battery
ontmuit
-
STARTING
STARTER RELAY
INSPECTION
REMOVE STARTER RELAY
1 .
INSPECT STARTER RELAY CONTINUITY
2.
(a)
Using an ohmmeter, check that there is continuity be
tween terminals 1 and
If
there is no continuity, replace the relay.
Check that there is no continuity between terminals 3 and
{b)
Ohmmet e r
5.
If there is continuity, replace the relay.
Apply battery positive voltage across terminals i and 2.
INSPECT STARTER RELAY OPERATION
3.
(a}
Using an ohmmeter, check that there is continuity be-
(b)
tween terminals 3 and 5.
II there is continuity, replace the relay.
REINSTALL STARTER RELAY
4.
OO{)m
STARTER RFLIIY
2_
ST-17