Remove Column Upper Bracket And Column Upper Clamp; Remove Bracket Spacer And 2 No. 1 Support Collars - Toyota Celica 2000 Repair Manual

SR-14
;
- -:
-
c__
25
5'"
.
· .l["3
I
�
'
I I
l . '
.
I .\
·
I
N
N
N
STEERING
DISASSEMBLY
1 . REMOVE COLUMN UPPER BRACKET AND COLUMN
UPPER CLAMP
Using a centering punch, mark the center of the 2 ta-
(a)
E't c act m
pered-head bolts.
Using a 3 - 4 mm (0. 1 2 - 0 . 1 6 in.) drill, drill into the 2 bolts.
(b)
(c) Using a screw extractor, remove the 2 bolts, column up-
per bracket and column upper clamp.
""�
REMOVE TILT STEERING SUPPORT
2.
Remove the bolt and !lit steering support.
REMOVE BRACKET SPACER AND 2 NO. 1 SUPPORT
3.
COLLARS
Using an extension bar and a hammer, tap out the bracket
(a)
spacer.
Using a screwdriver, remove the 2 No. 1 support collars.
(b)
4. REMOVE TILT LEVER AND BREAK AWAY BRACKET
Remove the tilt spring.
(a)
f0-'-874
Remove the No. 2 tilt lever lock boll and No. 1 support re­
{b)
inforce.
HINT:
This bolt is left-handed one.
TILT STEERING COLUMN ""'"'"''