Toyota Celica 2000 Repair Manual page 392

I
p
p
MANUAL TRANSAXlE
6. Transmission case side:
IF NECESSARY, REPLACE OIL SEAL AND TAPERED
ROLLER BEARING OUTER RACE
Using SST, pull out the tapered roller bearing outer race
(a )
and shim.
SST
Using SST and a hammer, drive out the oi! seal.
(b )
SST
Using SST and a hammer, drive in a new oil seal.
(c)
SST
Drive in depth: 9.9 ± 0.3 mm (0.390 ± 0.012 in.)
Coat the lip of the oil seal with MP grease.
(d)
Place the shim into the differential case.
(e)
00!371
Using SST and a press, install the tapered roller bearing
(f)
outer race.
SST
NOTICE:
When replacing the tapered roller bearing outer race, re·
place the tapered roller bearing along with it.
7. Transaxle case side:
IF NECESSARY, REPLACE OIL SEAL AND TAPERED
ROLLER BEARING OUTER RACE
Using a screwdriver and hammer, drive out the oil seat.
(a)
DIFFERENTIAL CASE
09612-65014
09226-10010
09226-1 001 0
09950-60020 (099 5 1 -0071 0), 09950-70 0 1 0
(09951-{)7150)
MX-47