T
-
BRAKE
REAR SPEED SENSOR
INSTALLATION
1 .
INSTALL NEW SPEED SENSOR
Clean the contacting surface of the axle hub and a new
(a)
speed sensor.
NOTICE:
Do not stick any foreign objects to the sensor rotor.
Place the speed sensor on the axle hub so that the con
(b)
nector makes the most downward position under the on
vehicle condition.
Using SST and a press, instal! a new speed sensor to the
(c)
axle hub.
SST
09214-7601 1
NOTICE:
Do not tap the speed sensor with a hammer directly.
Check that there should
speed sensor detection portion.
Press in the speed sensor straight and slowly.
�O!J<l>'J
INSTALL SPEED SENSOR WITH REAR AXLE
2.
(See page SA-59)
CONNECT SPEED SENSOR CONNECTOR
3.
INSTALL REAR WHEEL
4.
Torque: 103 N-m (1 ,050 kgf . cm, 76 ft.lbf)
CHECK SPEED SENSOR SIGNAL (See page Dl-276)
5.
BR-.61
be
no foreign objects on the