SF-52
Conti n ui t y
-·
SFI
EFI MAIN RELAY
INSPECTION
1.
REMOVE EFI MAIN RELAY (Marking: EFI)
INSPECT EFI MAIN RELAY CONTINUITY
2.
Using an ohmmeter, check that there is continuity be-
(a)
Ohmmeter
tween terminals 1 and 2.
If there is no continuity, replace the relay.
Check that there is no continuity between terminals 3 and
(b)
5.
If there is continuity, replace the relay.
"'�'
onti n ui t y
INSPECT EFI MAIN RELAY OPERATION
3.
Apply battery voltage across terminals 1 and 2.
(a )
Ohmmeter
Using an ohmmeter, check that there is continuity be
(b)
tween terminals 3 and 5.
If there is no continuity, replace the relay.
4.
REINSTALL EFI MAIN RELAY
EFI MA1N RELAY