Toyota Celica 2000 Repair Manual page 489

AX-26
AUTOMATIC TRANSAXLE (U240E)
'
'
'
'
'
I
- ---
--
N
FLOOR SHIFT ASSEMBLY
INSTALL LOWER POSITION INDICATOR HOUSING
6.
Apply MP grease on the spring.
(a)
Install the spring and shift lock release button.
(b)
Instal! the indicator lamp wire sub-- a ssembly with the
(c)
screw.
Install the bulb and bulb cap to the indicator lamp wire
(d)
sub-assembly.
Install the lower position indicator housing with the 4
(e)
screws.
Install the indicator lamp wire sub-assembly.
(f )
INSTALL UPPER POSITION INDICATOR HOUSING
7.
Install the 4 slide covers to the lower position indicator
(a)
housing, as shown in the illustration.
Install the control position indicator plate.
(b)
Install the upper position indicator housing.
(c)
8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Apply MP grease on the compression spring.
(a)
Install the compression spring, shift lever knob button
(b )
guide, shift lever knob button and shift lever stop pin.
Install the No. 2 slide cover.
{ c)
0/0
Install the main switch.
(d)
Install the shift lever knob sub-assembly with the 2
(e)
screws.
HINT:
Coat the threads of screws with sealant.
Sealant:
Part No. 08833-UOOSO, THREE BOND 1344, LOCTITE
242 or equivalent
NOTICE:
Make sure not to catch
INSTALL OlD MAIN SWITCH TERMINAL
9.
0/0
Connect the 2
(a)
tor.
Connect the connector to the shift lever plate.
(b)
0/0
main switch wire harness.
main switch terminals to the connec­