Toyota Celica 2000 Repair Manual page 842

-
BODY ELECTRICAL
HEADLIGHT AND TAILLIG! IT SYSTEM
Draw the vertical lines on the paper where the headlights
{g)
(low beam center marks) of the vehicle are to be,(V RH
and LH lines)
Take an appropriate measure to avoid affecting the other
{h}
light.
NOTICE:
Disconnect the connector of the other light to avoid
heat affection from the light because the other lens of
the head light assembly is made of synthetic resin.
When connecting the connector again take care not
to make the aiming out of adjustment.
When covering the headlight, finish it within 3 min·
utes.
U)
Turn the headlights ON.
(i)
Check that the head lights light up the pa per as shown in
the illustration.
HINT:
As shown in the illustration, adjust aiming of the LH and RH
lights respectively.
BE-21