Inspect Gear Shift Fork And Reverse Gear Clearance; Inspect Output Shaft - Toyota Celica 2000 Repair Manual

Hide thumbs Also See for Celica 2000:

Table of Contents

MANUAL TRANSAXLE (C56)

INSPECT GEAR SHIFT FORK AND REVERSE GEAR

Using a feeler gauge, measure the clearance between the re

verse gear and gear shift fork.

Maximum clearance: 0.35 mm (0.014 in.)

If the clearance exceeds the maximum, replace the gear shift

fork or hub sleeve.

Check the output shaft for wear or damage.

Using a micrometer, measure the outer diameter of the

output shaft journal surface.

Minimum outer diameter:

Part A; 32.985 mm ( 1.2986 in.)

Part B; 37.985 mm (1 .4955 ln.)

Part C; 3 1.985 mm (1.2592 in.)

If the outer diameter is less than the minimum, replace the out

Using a dial indicator, check the shaft runout.

Maximum runout: 0.03 mm (0.0012 in.)

If the runout exceeds the maximum, replace the output shaft.

OUTPUT SHAFT

Troubleshooting