Side Airbag Assembly Inspection - Toyota Celica 2000 Repair Manual

RS-42
SUPPLEMENTAL RESTRAINT SYSTEM
p
p
INSPECTION
Cross Section
1 . Vehicles not involved in collision:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check (See page Dl-326).
(a )
Do a visual check which includes the following item with
(b)
the seatback assembly installed in the vehicle.
Check that there are no cuts and cracks of the outside of
side airbag assembly.
2. Vehicle involved In a collision and airbag is not
deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check (See page 01-326).
(a)
Do a visual check which includes the following items with
(b)
the seatback assembly removed from the vehicle.
CAUTION:
For removal and installation of the seatback assembly, see
page RS-40 and RS-50. Be sure to follow the correct pro­
cedure.
H1l900
Vehicle involved in a collision and atrbag is deployed:
3.
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check (See page 01-326).
(a)
Do a visual check which includes the following items with
(b)
the seatback assembly removed from the vehicle.
CAUTION:
For removal and Installation of the seatback assembly, see
page R$-40 and RS-50. Be sure to follow the correct pro�
cedure.
HINT:
If the seat adjuster is deformed, never repair it. Always replace
it with new one.
-
SIOEAIRBAG ASSEMBLY
•
Check cuts and cracks of the side airbag assembly.
•
Check cuts and cracks in wire harness, and chip-
ping in connectors.
•
Check the seatback installation part ol the seat ad­
juster.
•
Check the damage to the connector and wire har­
ness.