SR-4
Nor m al
STEERING
POWER STEERING FLUID
BLEEDING
CHECK FLUID LEVEL (See page SR-5)
1 .
2.
JACK UP FRONT OF VEHICLE AND SUPPORT IT
WITH STANDS
3.
TURN STEERING WHEEL
With the engine stopped, turn the steering wheel slowly from
lock to lock several times.
4.
LOWER VEHICLE
5.
START ENGINE
Run the engine at idle for a few minutes_
TURN STEERING WHEEL
6.
With the engine idling, turn the steering wheel to left or
(a)
right full lock position and keep it there for 2-3 seconds,
then turn the steering wheel to the opposite full lock posi
tion and keep it there for 2-3 seconds.
Repeat (a) several times.
(b)
7.
STOP ENGINE
Abnor m al
8.
CHECK FOR FOAMING OR EMULSIFICATION
If the system has to be bled twice specifically because of foam
ing or emulsification, check for fluid leaks in the system.
CHECK FLUID LEVEL (See page SR-5)
9.
-�
POWER STEERING FLUID