Toyota Celica 2000 Repair Manual page 672

ABS Act u at o r
BRAKE
ABS ACTUATOR
CLEAR DTC (See page Dl-276)
5.
IN CASE OF NOT USING TOYOTA HAND-HELD TES­
6.
TER:
HINT:
Using the ABS actuator checker (SST), check the operation of
the actuator. If the actuator does not operate, check the opera­
tion of sub-wire harness G according to the instructions on
pages 01�300 and Dl-295. I f the solenoid and/or pump motor
relay are abnormal, replace the relay and inspect the actuator
operation again.
INSPECT BATTERY POSITIVE VOLTAGE
7.
Battery positive voltage: 1 0 - 14
DISCONNECT CONNECTORS
B.
Disconnect the 2 connectors from the actuator.
9. CONNECT ACTUATOR CHECKER (SST)
Connect the actuator checker (SST ) to the actuator side
(a}
wire harness via the sub-wire harness (SST), as shown.
SST 09990-001 50, 09990-00250, 09990-00300,
09990-00360
Connect the red cable of the checker to the battery posi·
(b)
tive (+) terminal and black cable to the negative (�) termi­
nal. Connect the black cable of the sub-wire harness to
the battery negative {-) terminal or body ground.
Sub-Wi r e Harness ( S ST)
l
-�-
Sub-Wi r e Har n ess ( S ST)
I
BR--49
v