Toyota Celica 2000 Repair Manual page 424

y
MANUAl TRANSAXLE
REMOVE NO. 1 GEAR SHIFT FORK FROM REVERSE
37.
GEAR GROOVE
38 . REMOVE NO. 3 GEAR SHIFT FORK SHAFT AND RE·
VERSE SHIFT FORK
Remove the No. 3 gear shift fork shaft from the reverse
(a)
shift fork and transaxle case.
Remove the reverse shift fork.
(b)
REMOVE NO.2 GEAR SHIFT FORK FROM NO.2 HUB
39.
SLEEVE GROOVE
REMOVE INPUT AND OUTPUT SHAFTS TOGETHER
40 .
FROM TRANSAXLE CASE
REMOVE DIFFERENTIAL CASE ASSEMBLY
41.
NOTICE:
At the time of reassembly, please refer to the following
item.
Before reassembly, inspect the differential tapered roller
bearing preload. (See page MX-52)
REMOVE MAGNET FROM TRANSAXLE CASE
42.
43 . DISASSEMBLE NO. 3 CLUTCH HUB ASSEMBLY
Using a screwdriver, remove the 2 shifting key springs.
(a)
NOTICE'
At the time of reassembly, please refer to the following
item.
Position the shifting key springs so that their end gaps are
Remove the 3 No. 3 shifting keys from the No. 3 clutch
not aligned.
(b)
hub.
-
MANUAL TRANSAXLE ASSEMBLY
MX-23