Toyota Celica 2000 Repair Manual page 902

Within
40
sees.
Press the lock and unlock switches on the transmitter switch simultaneously for
more than between
3
Within
sees
Press either one of
Door control relay automatically performs LOCK-UNLOCK operation once or
twice at a
signal from the transmitter.
3
LOCK-UNLOCK occurs once
Within
sees.
Registration of recognition code is completed
LOCK-UNLOCK occurs twice
Registration of recognition code has not been completed.
•
Recognition code received first time and second time did not match.
•
When select1nQ add mode, a registered recognition code was received.
If LOCK-UNLOCK operation can not be performed at all, the mode returns to the
normal mode, then start with "Start registration of recognition code".
!I
even one of the following conditions is satisfied, registration of recognition
codes is r ..omp!eted.
• 40
•
• The driver's door is opened.
• 4
The key plate is inserted in lhe ignition key cylinder.
Registration of recognition codes {add mode or rewrite mode) is completed.
BODY ElECTRICAL
When prohibition
mode is selected.
Door control relay performs LOCK-UNLOCK operation
interval to inform the operator that prohibition mode has been selected.
LOCK
sec. or more and
1
2
switches on the transmitter.
sec. interval to inform the operator that the receiver has received the
1
Proceed to finish registration
sees. elapses since the door control relay response.
type recognition codes are registration at one time.
WIRELESS DOOR LOCK CONTHOL SYSTEM
Approx. Approx.
1 soc.
1 soc.
sec. below.
1 .5
Proceed to continue registration
BE--81
5
times at a sec.
1
I
I
'
I
I
I
'
'
Within 40 sees.