Install Engine Coolant Drain Union; Install Knock Sensor - Toyota Celica 2000 Repair Manual

EM-1 1 2
Adhesive
CYLINDER BLOCK
ENGINE MECHANICAL
:
HINT
Avoid applying an excessive amount to the surface.
•
Parts must be assembled within 3 minutes of ap­
plication. Otherwise the materia! must be removed
and reapplied.
Immediately remove nozzle from the tube and rein­
stall cap.
1 ZZ-FE:
(c)
Install the oil pan with the 1 4 bolts and 2 nuts. Uniformly
tighten the bolts and nuts in several passes.
2ZZ-GE:
(d)
Install the oil pan with the 1 2 bolts and 4 nuts. Uniformly
tighten the bolts and nuts in several passes.
Torque: 9.0 N-m (92 kgf . cm, 80 in . . lbf)
19. INSTALL OIL FILTER UNION
Torque: 30 N-m (306 kgf . cm, 21 ft-lbf)
20. INSTALL OIL FILTER (See page LU-3)
21. INSTALL OIL PUMP (See page LU-13)

INSTALL ENGINE COOLANT DRAIN UNION

22.
Apply adhesive to 2 or 3 threads.
(a)
Adhesive:
Part No. OB83:Hl0080, THREE BOND 1344,
LOCTITE 242 or equivalent
(b) Install the drain union.
Torque:
1ZZ-FE 20 N-m (200 kgf.cm, 1 4 ft-lbf)
2ZZ-GE 25 N-m (255 kgf . cm, 18 ft-lbf)
HINT:
After applying the specified torque, rotate the drain union clock­
wise until its drain port is facing downward.
23.

INSTALL KNOCK SENSOR

Torque: 39 N-m (400 kgf.cm, 29 tt-lbf)