Toyota Celica 2000 Repair Manual page 34

�
ENGINE MECHANICAL
TIMING CHAIN
(d ) Install the timing chain cover, D-ring and water pump
with the 1 7 bolts and nut. Uniformly tighten the bolts and
nut in several passes.
Torque:
1 0 mm head:
9 N.m (92 kgf.cm, 80 in,·lbf) for C
1 3 N.m (133 kgf.cm, 1 0 ft.lbf) for A
1 1 N·m ( 1 1 3 kgf . cm, 8 ft·lbf) for others
1 2 mm head:
1 8.5 N.m (189 kgf.cm, 1 4 ft.lbf)
NOTICE:
•
Pay attention not to wrap the chain and slipper over
the chain cover seal line.
•
After installing the chain cover, must install the
mounting bracket and water pump within 1 5 minutes.
HINT:
mm (1 .77 in.)
Each bolt length in indicated in the illustration.
B 35 mm (1 .38 in . )
A
45
30 mm ( 1 .
mm (0.98 in.)
C
0
25
Using a torx wench socket (ES), install the stud bolt.
(e)
Torque: 9.3 N·m (95 kgf . cm, 82 in,·lbf)
i
8 n. )
1
EM-29