Brake Booster Assembly Removal - Toyota Celica 2000 Repair Manual

N
BRAKE 8RAKF BOOSTER ASSEMBLY
REMOVAL
REMOVE FRONT L H WHEEL
1 .
Torque: 103 N·m (1 ,050 kgf.cm, 76 ft·lbf)
2. REMOVE MASTER CYLINDER (See page BR-10)
3. DISCONNECT VACUUM HOSE FROM BRAKE
BOOSTER
WI
ABS:
4.
REMOVE ABS ACTUATOR ASSEMBLY
(See page BR-53)
5. REMOVE FRONT LH BRAKE LINE
(a) Using SST and spanner, disconnect the brake line from
the flexible hose of front LH brake_
SST 09751-36011
Pull out the brake line with the grommet from the bod y.
(b)
6. REMOVE BRAKE BOOSTER
Remove the lower No. 1 panel and finish panel.
(a)
Remove the return spring, clip and clevis pin.
(b)
Remove the clevis and 4 nuts.
(c)
Pull out the brake booster and gasket.
(d)
BR-15