Park/Neutral Position (Pnp) Switch On-Vehicle Repair - Toyota Celica 2000 Repair Manual

AX-ll
AUTOMATIC TRANSAXLE (U240El
-
PARK/NEUTRAL POSITION (PNP) SWITCH
PARK/NEUTRAL POSITION (PNP)
SWITCH
ON-VEHICLE R EPAIR
1 . REMOVE AIR CLEANER ASSEMBLY
DISCONNECT PARKINEUTRAL POSITION SWITCH
2.
CONNECTOR
3. REMOVE PARKINEUTRAL POSITION SWITCH
Remove the nut.
(a)
Remove the nut, washer and control shift lever.
(b)
Using a screwdriver. pry off the lock plate.
(c)
Remove the nut and lock plate.
(d)
Remove the 2 bolts and pull out the park/neutral position
(e)
switch.
INSTALL AND ADJUST PARK/NEUTRAL POSITION
4.
SWITCH
Install the park/neutral position switch with the 2 bolts.
(a)
Torque: 5.4 N-m (55 kgf.cm,
Install a new lock plate and nut.
(b)
Torque: 6.9 N.m (70 kgf.cm, 61 ln.·lbf)
Bend the claws on the lock plate to fix the nut.
(c)
48
in .. Jbf)