Adjust Valve Clearance - Toyota Celica 2000 Repair Manual

2ZZ-GE:
N
Matchmark
VALVE CLEARANCE
ENGINE MECHANICAL
·-
Turn the crankshaft 1 revolution {360 " ) and align the mark
(b)
as above (See procedure in step 2).
Check only the valves indicated as shown. Measure the
(c)
valve clearance (See procedure in step (a)).
A10J66
4. 1ZZ -FE:

ADJUST VALVE CLEARANCE

(a) Set the No. 1 cylinder to the TOG/compression (See pro­
cedure in step 2).
Place matchmarks on the timing chain and camshaft tim­
(b)
ing sprockets.
(c) Remove the 2 bolts and chain tensioner.
A\G4ll
(d) Remove the camshaft and timing sprocket assemblies
(See page EM-42).
19 camshaft bearing
(i)
(2) 9
(3)
Exhaust camshaft and timing sprocket assembly
Intake camshaft and timing sprocket assembly
(4)
HINT:
When disconnect the timing chain from the camshaft timing
sprocket, holding the timing chain.
Tie the timing chain with a string as shown in the illustra­
(e)
tion.
NOTICE:
•
Be careful not to drop anything inside the timing
chain cover.
Do not allow the chain to come into contact with water
or dust.
(f) Remove the valve lifters.
cap
bolts
camshaft bearing caps (No. 1 & No. 3)
EM-5