Rear Brake Caliper Removal - Toyota Celica 2000 Repair Manual

BRAKE REAR BRAK!::: CALIPER
REMOVAL
1 . REMOVE REAR WHEEL
Torque: 103 N-m (1,050 kgf . cm, 76 ft-lbl)
2. DISCONNECT FLEXIBLE HOSE
Remove the union bolt and gasket from the caliper, then
(a)
disconnect the flexible hose from the caliper.
Torque: 30 N.m (310 kgf.cm, 22 ft·lbf}
HINT:
At the time of installation, insert the flexible hose lock securely
in the lock hole in the caliper.
(b) Use a container to catch the brake fluid as it drains out.
3. REMOVE CALIPER
Remove the 2 installation bolts and caliper.
(a )
Torque: 47 N-m (475 kgf . cm, 34 fl·lbl)
Remove the caliper from the torque plate.
(b)
REMOVE 2 PADS WITH ANTI-SQUEAL SHIMS
4.
BR-37