Replace Door Control Receiver And Transmitter - Toyota Celica 2000 Repair Manual

BE-78
BODY ElECTRICAL
REPLACE DOOR CONTROL RECEIVER AND TRANS·
2.
MITIER
NOTICE:
When replacing the door control receiver and transmitter,
registration of recognition code is necessary because they
are provided as single components.
Select which operation mode should be performed from
(a)
the following modes.
•
Add mode
•
Rewrite mode
..
Prohibltlon mode
Confirmation mode
HINT:
•
The add mode is used to retain codes already registered
while you register new recognition codes. This mode is
used when adding a transmitter. However, if the number
of registered codes exceeds
tered codes are correspondingly erased in order, starting
from the first registered code.
•
The rewrite mode is used to erase all previously regis¥
tered codes and register only new recognition codes.
•
The prohibition mode is used to erase all registered codes
and cancels the wireless door lock function. Use this
mode when the transmitter is lost.
•
The confirmation mode is for confirming how many recog¥
nition codes are already registered before you register
additional recognition codes.
Follow the chart on the following pages to register the
(b)
transmitter recognition code at the wireless door lock con¥
trol receiver.
HINT:
•
When procedure is out of the specified, the operation re­
turns to normal operation.
•
Maximum
SYSTEM
codes, previously regis­
4
recognition codes can be registered.
4