Toyota Celica 2000 Repair Manual page 730

N
STEERING -
(c)
SST
NOTICE:
Make sure that the oil seal is installed facing in the correct
direction.
4. IF NECESSARY, REPLACE BEARING
Using a punch and a hammer, tap out the bearing.
(a)
(b ) Coat a new bearing with molybdenum disulfide lithium
base grease.
Using a brass bar and a hammer, tap in the bearing.
(c)
IF NECESSARY, REPLACE 2 UNION SEATS
5.
Using a screw extractor, remove the union seat from the
{a)
Screw
Extractor rack housing.
Using a hammer and an extension bar, lightly tap in a new
{b)
union scat
NOTICE:
Before installing the union seat, remove the dust sticking
to the rack housing.
(c)
Employ the same manner described above to the other
side.
POWER STEERING GEAR
Using SST and a hammer, tap in the oil seaL
09950-6001 0 (09951 -00240, 09951 -00350,
09952-06010), 0995Q-70010 (09951-071 50)
SR-43