STEERING
TILT STEERING COLUMN
Remove the adjusting nut, tilt lever, stopper, tilt lever lock
{c)
bolt and break away bracket.
HINT:
This nut is left-handed one.
Remove the No. 2 support collar from the break away
(d)
bracket.
5.
REMOVE MAIN SHAFT BUSHING
Using a screwdriver and hammer, tap out the main shaft bush
ing.
6,
REMOVE MAIN SHAFT ASSEMBLY
Using a snap ring expander, remove the snap ring on the
(a)
upper side.
Remove the main shaft assembly.
{b)
Using a snap ring expander, remove the snap ring on the
(c )
!ower side.
SR-15