Install Oil Strainer; Install Oil Pan Baffle And Oil Strainer; Install Oil Pan - Toyota Celica 2000 Repair Manual

ENGINE MECHANICAL
4-5mm
Seal Width
8mm
I P
8
CYLINDER
HINT:
Wipe seal packing away from the contact surface of the cylinder
block assembly and oil seal.
16. 1 ZZ-FE:
Install a new gasket and the oil strainer with the 2 nuts and bolt.

INSTALL OIL STRAINER

Torque: 9.0 N-m (92 kgf.cm, 80 ln.-lbf)
17. 2ZZ-GE:
Install the oil pan baffle with the 4 bolts and 2 nuts.

INSTALL OIL PAN BAFFLE AND OIL STRAINER

(a)
Torque: 9.0 N-m (92 kgf.cm, 80 in .. Jbf)
Install a new gasket and oil strainer with the 2 nuts and
{b)
bolt.
Torque: 9.0 N-m (92 kgf-cm, 80 in . . fbf)
18.

INSTALL OIL PAN

Remove any old packing {FIPG} material and be careful
(a)
not to drop any oil on the contact surface of the main bear�
ing cap and oil pan.
�
Using a razor blade and gasket scraper, remove all
the old packing (FIPG) material from the gasket sur­
faces and sealing grooves.
•
Thoroughly clean all components to remove all the
loose material.
•
Using a non-residue solvent, clean both sealing
surfaces.
NOTICE:
Do not use a solvent which will affect the painted surfaces.
Apply seal packing to the oil pan as shown in the illustra-
(b)
tion.
Seal packing:
Part No. 08826- - 00080 or equivalent
Install a nozzle that has been cut to a 4 - 5 mm (0.16
A£!\().11
- 0.20 in.) opening.
BLOCK
EM-111