Toyota Celica 2000 Repair Manual page 435

MX-34
MANUAL TAANSAXLE (C60}
REASSEMBLY
HINT:
Coat all of !he sliding and rotating surfaces with gear oil before
reassembly.
ASSEMBLE NO. 2 HUB SLEEVE ASSEMBLY
1.
Install the 3 No. 2 shifting key springs and No. 2 shifting
(a)
keys to the No. 2 clutch hub.
Install the No. 2 hub sleeve to the No. 2 clutch hub.
(b)
Assemble the No. 2 hub sleeve and No. 2 clutch hub in the
direction shown In the illustration.
INSTALL NEEDLE ROLLER BEARING, 3RO GEAR,
2.
NO. 2 SYNCHRONIZER RING (FOR 3RD GEAR) AND
NO. 2 HUB SLEEVE ASSEMBLY TO INPUT SHAFT
Apply gear oil to the needle roller bearings and install it.
(a}
Install the 3rd gear and No. 2 synchronizer ring (for the 3rd
(b)
gear).
NOTICE:
Distinguish the No. 2 synchronizer ring (for the 3rd gear) by
the teeth on the synchronizer ring.
Install the No. 2 hub sleeve assembly so that the No. 2
(c)
synchronizer ring slots and No. 2 shifting keys are
aligned.
NOTICE:
Be sure to install the No. 2 hub sleeve assembly In the carR
rect direction, as shown In the illustration.
Using a press, install the No. 2 hub sleeve assembly.
{d)
N000 0 7
--
INPUT SHAFT