Table of Contents
Advertisement
CombiFlash NextGen Systems
Section 2 Preparation
2.1 Unpacking the System
EAR99 Technology Technology Subject to Restrictions Contained on the Cover Page
This section provides instructions for unpacking and installing
the CombiFlash NextGen system. The PurIon Mass Spec-
trometer includes supplementary instructions for installation of
the PurIon in sections 2.1 through 2.16.
Note
CombiFlash PurIon system installation is not covered by this
manual. Instead, refer to instruction sheet 60-5233-638
(included with the PurIon) for the installation procedures.
Note
Section 2.16 contains an Installation Qualification checklist. If
required, sign off the checklist entries as you successfully
complete the following sections.
The CombiFlash NextGen system is shipped in a single carton.
Carefully unpack the shipment and inspect the contents.
The system is heavy. Use a two-person lift to prevent injury.
Do not lift the system by the fraction collector arm. Use the lift-
ing handles located on the instrument side panels. The left
side has a flush mount shipping handle, while the right side
can be lifted by gripping the side wall above the fraction collec-
tion area.
If there is any damage to the shipping carton or any components,
contact the shipping agent and Teledyne ISCO (or its authorized
representative) immediately.
If there is any evidence that the system has been damaged
in shipping, do not plug it into AC power. Contact Teledyne
ISCO or its authorized representative for advice.
WARNING
CAUTION
WARNING
2-1
Advertisement
Table of Contents
