Table of Contents
Advertisement
CombiFlash NextGen Systems
Section 1 Introduction
1.3 Operating Overview
1.3.1 System Control
Possibilities
1.3.2 Data Storage
1.4 Specification
Table 1-1 CombiFlash NextGen System Specifications
Overall Dimensions
(H W D)
Weight
Power Options
Line Frequency
Ambient Temperature
Humidity (when connected
to power)
Flow Rate Range
Flow Rate Accuracy (tested
with water at 138 kPa or 20
psi)
b c d e
Pressure Limit
1-6
The CombiFlash NextGen system is equipped with a capacitive
touch screen display for local control.
The system also supports TCP/IP communication to allow direct
or network control of the system by a computer using a modern
web browser such as Microsoft Edge, Google Chrome, or
Mozilla Firefox.
Note
Teledyne ISCO recommends that you obtain assistance from
your Information Technology department before attempting
direct or network connections
The system can be accessed from the built-in touch panel and up
to ten network devices. The touch panel shares control with all
connected devices. The system performs the most recent
command from any control input.
To support operation from a variety of direct and network con-
nections, the software and all files are stored in the CombiFlash
NextGen unit on an internal hard drive. This ensures that your
compound purification methods and run history files can be
viewed from any connection. Optionally, run files may be saved to
a USB flash drive, a networked controlling computer, or a
network drive.
NextGen 100 Systems
66 x 36 x 43 cm (26 x 14.1 x 17")
27.7 kg (61 lbs)
33.6 kg (74 lbs) with Optional ELSD
Input voltage range from 100 to 240 VAC, 50/60 Hz, 2.0 Amps maximum.
Line cord is the disconnect device.
50/60 Hz
20 to 40 °C (maximum temperature must be at least 15 °C below the boiling point of the
solvent)
95% relative humidity maximum at 20 to 40 °C
1 to 100 mL/min
±10%
1035 kPa (150 psi)
EAR99 Technology Technology Subject to Restrictions Contained on the Cover Page
a
NextGen 300/300+ Systems
27.7 kg (61 lbs)
33.6 kg (74 lbs) with Optional ELSD
1 to 300 mL/min
±5% (5-200 mL/min)
Up to 2070 kPa (300 psi)
Up to 1035 kPa (150 psi) (if not equipped
with injection valve)
Advertisement
Table of Contents
