4700 Sampler Installation Overview; Positioning The Sampler - Teledyne 4700 Pocket Manual

4700 Refrigerated
Section 2 Installation
2.1 4700 Sampler Installation
Overview
The following sections provide general
instructions for placing the sampler into
operation. In typical applications, the steps are:
1. Position the sampler. (Section 2.2)
2. Install a bottle kit. (2.3)
3. Attach the suction line. (2.4)
4. Attach a strainer. (2.5)
5. Route the suction line and strainer. (2.6)
6. Connect external instruments. (2.7)
7. Connect power. (2.8)
8. Configure and program the sampler. (2.9)
9. Lock the sampler. (2.10)

2.2 Positioning the Sampler

There are a few considerations when selecting a
site for the sampler. The foremost concern
should be personal safety.
Sampler
2-1