Configuring Security Settings For A Wlan Ssid Profile - Siemens SCALANCE W1750D UI Configuration Manual

Wireless Network Profiles
11.1 Configuring Wireless Network Profiles
11.1.3

Configuring Security Settings for a WLAN SSID Profile

This section describes the the procedure for configuring security settings for an Employee or
Voice network. For information on guest network configuration, see Captive Portal for Guest
Access (Page 161).
Note
If you are creating a new SSID profile, configure the WLAN and VLAN settings before
defining security settings. For more information, see Configuring WLAN Settings for an SSID
Profile (Page 110) and Configuring VLAN Settings for a WLAN SSID Profile (Page 117).
Configuring Security Settings for an Employee or Voice Network
You can configure security settings for an Employee or Voice network by using the
SCALANCE W UI or the CLI.
In the SCALANCE W UI
To configure security settings for an Employee or Voice network:
1. On the Security tab, specify any of the following types of security levels by moving the
slider to a desired level:
– Enterprise—On selecting the enterprise security level, the authentication options
– Personal—On selecting the personal security level, the authentication options
– Open—On selecting the open security level, the authentication options applicable to
The default security setting for a network profile is Personal.
120
applicable to the enterprise network are displayed.
applicable to the personalized network are displayed.
an open network are displayed.
Configuration Manual, 02/2018, C79000-G8976-C451-02
SCALANCE W1750D UI