Smtp Client - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

Configuring with Web Based Management
6.5 "System" menu
Description
The table has the following columns:
●
Select the client type for which you want to make settings:
– E-mail
– Log Table
– Syslog
– WLAN Authentication Log
● Severity
Select the required level. The following settings are possible:
– Critical
– Warning
– Info
Procedure
Follow the steps below to configure the required level:
1. Select the required values from the drop-down lists of the second table column after the
client types.
2. Click the "Set Values" button.
6.5.10

SMTP Client

Network monitoring with e-mails
The device provides the option of automatically sending an e-mail if an alarm event occurs
(for example to the network administrator). The e-mail contains the identification of the
sending device, a description of the cause of the alarm in plain language, and a time stamp.
This allows centralized network monitoring to be set up for networks with few nodes based
on an e-mail system. When an e-mail error message is received, the WBM can be started by
the Internet browser using the identification of the sender to read out further diagnostics
information.
214
Client Type
Sending system event messages by e-mail
Entry of system events in the log table
Entry of system events in the Syslog file
Entry of system events in the WLAN authentication log
System events are processed as of the severity level "Critical".
System events are processed as of the severity level "Warning".
System events are processed as of the severity level "Info".
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13