Changing The Host Ip Address - Siemens HiPath User Manual

HSAAP_Getting_Started.fm
Getting started with a Standalone Access Point

Changing the host IP address

The Standalone Access Point will automatically reboot using the new
>
downloaded firmware version.
5.5 Changing the host IP address
Use the LAN screen to change the IP address for the Standalone Access Point.
To change the host IP address:
1. On the menu bar, click Configuration. The LAN screen is displayed.
2. In the IP Address box, type the static IP address. The default is 192.168.1.20.
3. To save your changes, click Save.
The Reboot button is available on this screen.
>
56
HiPath Wireless Standalone Access Point V1.0, Getting Started Guide
A31003-W1110-U101-1-7619, February 2007