Wlan Frequency Band (Client) - Siemens SCALANCE W770 Series Configuration Manuals

Network structures
7.1 WLAN
Syntax
Call up the command with the following parameters:
wlan frequency band { 2.4 | 5 }
The parameters have the following meaning:
Parameters
2.4
5
Result
The frequency band for the WLAN interface is specified.
Further notes
You display the setting with the show wlan basic <wlan 0/X> command.
7.1.5.50

wlan frequency band (client)

Description
With this command, you specify the frequency band for the WLAN interface.
Note
This command is only available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan frequency band { all | 2.4 | 5 }
The parameters have the following meaning:
Parameters
all
2.4
5
252
Description
Frequency band 2.4 GHz
Frequency band 5.2 (4.9; 5.6; 5.8) GHz
Description
Both frequency bands are used.
Frequency band 2.4 GHz
Frequency band 5.2 (4.9; 5.6; 5.8) GHz
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Range of values / note
Default setting: WLAN1: 2.4 GHz
Default setting: WLAN2: 5 GHz
Range of values / note
Default settings: WLAN1: 2.4 GHz
Configuration Manual, 09/2017, C79000-G8976-C324-08