Sntp Client - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

Configuring with Web Based Management
6.5 "System" menu
You can create a rule for the daylight saving time changeover.
● Start Date
Enter the following values for the start of daylight saving time:
– Hour
– Month
– Week
– Day
● End Date
Enter the following values for the end of daylight saving time:
– Hour
– Month
– Week
– Day
6.5.13.4

SNTP Client

Time-of-day synchronization in the network
SNTP (Simple Network Time Protocol) is used for synchronizing the time in the network. The
appropriate frames are sent by an SNTP server in the network.
Note
To avoid time jumps, make sure that there is only one time server in the network.
242
Specify the hour.
Specify the month.
Specify the week.
You can select the first to fifth or the last week of the month.
Specify the weekday.
Specify the hour.
Specify the month.
Specify the week.
You can select the first to fifth or the last week of the month.
Specify the weekday.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13