Output Option Hardware Errors - Lexmark CX825 Service Manual

Action
Step 15
Replace the output option controller board.
Does the problem remain?

Output option hardware errors

302 and 323 errors
302–303 error messages
Error Description
code
302.50 The motor (HPT transport) did not turn on. See
303.50 The motor (hole punch unit) did not turn
on.
316 error messages
Error Description
code
316.40 The motor (mailbox transport) ran too
slow.
316.41 The motor (mailbox transport) ran too fast.
320 and 323 error messages
Error code Description
320.00 The motor (staple finisher transport) does not turn
on.
323.80 The motor (staple finisher upper exit roller) does
not turn on.
Action
"Motor (HPT transport) service check" on page
See "Hole punch unit service check" on page
Action
See "Mailbox transport failure service check" on
page 495.
Action
See "Staple finisher compiler section jam
service check" on page
See "Staple finisher exit jam service check" on
page 498.
Diagnostic information
489
Yes No
Contact the next The problem is
level of support solved.
274.
7564
490.
493.