Lexmark CX825 Service Manual page 340

Action
Step 36
Reseat the sensor cable, and then check the sensor for
misalignment and damage.
Is the sensor properly installed and free of damage?
Step 37
Reinstall or replace the sensor. See
removal" on page 1136.
Does the problem remain?
Step 38
Check the compiler exit rollers for contamination, wear, and
damage.
Are the rollers free of damage?
Step 39
Check the rollers for misalignment.
Are the rollers properly installed?
Step 40
Reinstall or replace the roller. See
on page 1142.
Does the problem remain?
Step 41
Check the compiler paddle and exit drive for proper installation.
•
Check all of the components for misalignment.
•
Reseat the cables.
•
Make sure that the cables are properly routed.
Is the paddle and exit drive properly installed?
Step 42
Check the compiler paddle and exit drive for damage.
•
Check the gears and paddles for contamination, wear, and
damage.
•
Reseat the cables.
•
Make sure that the cables are properly routed.
Is the paddle and exit drive free of damage?
"Sensor (compiler exit cam)
"Compiler exit roller removal"
Diagnostic information
340
Yes No
Go to step 38. Go to step 37.
Go to step 38. The problem is
solved.
Go to step 39. Go to step 40.
Go to step 41. Go to step 40.
Go to step 41. The problem is
solved.
Go to step 42. Go to step 43.
Go to step 44. Go to step 43.
7564