Lexmark CX825 Service Manual page 519

Action
Step 15
Reinstall or replace the sensor.
Does the problem remain?
Step 16
Check the MSHPF stapler bin for misalignment and damage.
Note: Make sure that the shaft aligns with the gear.
Is the bin properly installed and free of damage?
Step 17
Turn the elevator gears and check if the bin moves from top to
bottom.
Does the bin properly move?
Step 18
Remove the obstructions along the bin path.
Does the problem remain?
Step 19
Reinstall or replace the bin.
Does the problem remain?
Step 20
Check the stapler bin gear for misalignment and damage.
Is the gear properly installed and free of damage?
Step 21
Reinstall or replace the gear.
Does the problem remain?
Step 22
Check the stapler bin elevator belt for misalignment and damage.
Note: Make sure that there are no other parts interfering with the
movement of the belt.
Is the belt properly installed and free of damage?
Step 23
Reinstall or replace the belt.
Does the problem remain?
Diagnostic information
519
Yes No
Go to step 16. The problem is
solved.
Go to step 17. Go to step 19.
Go to step 20. Go to step 18.
Go to step 19. The problem is
solved.
Go to step 20. The problem is
solved.
Go to step 22. Go to step 21.
Go to step 22. The problem is
solved.
Go to step 24. Go to step 23.
Go to step 24. The problem is
solved.
7564